It was developed for best preparation of the metal and aluminum surfaces to be painted and coated with any preservative. It removes oil and rust with a single wiping operation and opens micron-level pores on the surface. It creates a thin phosphate layer on metal surfaces. It increases the coverage of the paint by providing better adhesion. It does not require sanding on aluminum and other shiny surfaces. It is non-flammable, safe and does not cause discomfort to the user. It does not require heating when used with the wiping method. It is economical because it is highly concentrated. It extends the strength of the paint, prevents rusting and paint damage especially at the welding points. It is wide-ranging; Recommended on iron, steel, aluminum, bronze, copper, brass.
INSTRUCTIONS FOR USE: By wiping method; According to the condition of the oil, it is diluted with 1/10 to 1/15 usage ratio and the surface is wiped with the help of a brush or cloth. You can optionally rinse the cleaned surface. With the immersion method; You can heat it up to 70 degrees by diluting between 1/5 and 1/10. After immersing the parts to be cleaned and waiting for 5-10 minutes, the removed parts should be rinsed in water at the same temperature.
