It is a very strong product against corrosion in overseas shipments. It is used to protect all iron and steel parts that will not be painted against corrosion. After application to the surface, a translucent greenish-brown film layer remains on the surface. This film does not absorb water and moisture. The film layer does not dry completely, but is not runny. The film layer protects the surface against rust. Under ideal conditions, the protection period is 3 years. Bolts, nuts, discs, rods, iron and steel scaffolding, concrete mixers, all iron and steel parts encountered with acid vapor in the chemical industry, marine equipment and hardware, sea water tanks, brine tanks, pipes, steel coils, steel plates have long-term protection against corrosion. It can be used safely in precision instruments, precision machined surfaces, firearms, battery cables, ignition systems, locks, antennas.
INSTRUCTIONS FOR USE: It is applied by brush or spraying without the need to clean metal surfaces. Even if there is a thick rust layer on the metal surface, it is applied directly on the rusty layer. After a while, the product penetrates into the rust and reacts with the rust. A clean metal surface is obtained when the layer is removed. The product is applied using directly.
